[Update 3 - CFW] HABIB 4.53 CEX: Cobra Edition v1.03

by

STLcardsWS

Published on 12-21-2013 04:31 AM

419 Comments

PS3 Developer smhabib (aka HABIB) has ported Cobra 7.0 to his 4.53 CFW. "HABIB 4.53: Cobra Edition v1.00" features; PRX Plugin support at Startup, ISO Mounting, & NTFS Support and contains the usual patches found in most CFW's. There are a few known bugs that have not been ironed the developer warns about as seen below. These bugs should be fixed in a future release. At this time you can choose to stay on current 4.46 Cobra CFW's or upgrade on to this new 4.53 option. When comparing the two options at this time 4.46 Cobra CFW's provides a bit more support overall, but that is not to take nothing away from the fine work that developer smhabib is doing with this release. View the official release notes on this CFW release.

Update v1.03 - (Dec. 20): See update v1.03 below for all the details and latest changes from Habib (aka smhabib)

Update v1.03: HABIB/COBRA 4.53 v1.03
(12 / 20)

CHANGELOG v1.03:

1. PSP support fixed
2. Restored original ps2 emus.you can use ps2 classic as compatibility is same for cobra and ps2classic for ps3 slim.i cant fix ps2 issue of bc consoles as i dont have any,so compatibility between cobra and ps2classic on bc ps3 will vary....

Update v1.02: HABIB/COBRA 4.53 v1.02
(12 / 19)

CHANGELOG v1.02:
1. Fixed recovery mode hang.if anyone is stuck in recovery,pls follow these i

Instructions:

• Install a different hdd
• Follow instructions
• Install my CFW (the new version of 4.53 cobra or search for 4.46 V1.03A of Cobra)

2. Fixed PS2 bug ONLY on BC Consoles (not tested as i dont have bc console.if it still doesnt work,i need a good tester with bc console)

MD-5: D7C73D636340A622644DBC86BE16260E

Update v1.01: HABIB/COBRA 4.53 v1.01

CHANGELOG v1.01:
1. Disabled block of peek by cobra which cause black screen if controller not connected through usb.(Thanks Deank for your idea )

HABIB/COBRA 4.53 v1.00 (CEX)

• PRX Loading at Startup,
• ISO Mounting,
• NTFS Support are working but however I didn't test PS2 as I don't have BC consoles and didn't patch for PS3 slim as PS2 classic and Cobra uses same ps2_netemu.

KNOWN BUGS:

1. PSP of Cobra gives black screen but Remasters work (might be addressed in future)
2. mmCM (not Iris Manager) gives black screen if controller not connected (most likely mM (multiMAN / mmCM) issue as Iris Manager loads without a problem. )

NOTE:

1. PS2 ISOs for slim is PS2 Classic as Cobra and PS2 Classic uses same ps2_netemu
2. mmCM shows firmware version 4.46 for unknown reason.

ALSO:
I got no bc console to test PS2 so pls do test and if any issue,ill try to resolve

WARNING:

• DONT TRY TO SPOOF!

All the other patches of a cfw is included


DONATION:
this was a work done by taking so much time.so if you like you can donate me: (paypal)

THANKS:

1.kokotonix for trying to help
2.user for helping me in clarifying some things up (rtoc)
3.deank for his mm
4.naehwert
5.failoverflow
6.all other devs

TO OTHER DEVS:
stage0 base needs updating and stage1 flash_mount_446.S.flash mount uses ppc 64 bit instructions found in lv2_kernel and in lv2_dump,if you do not do this or the system cant allocate stage2 then it will kick you in recovery mode

TO PREVENT COPY-CATERS:
Signatures on offset 10108 of lv0.elf

WHAT I HEARD:
mmCM can work without connecting controller to PS3 by changing its id (BLES80608)TO ANYTHING ELSE


THIS COBRA PORT IS DONE FIRST TIME BY ME,SO I MAY PROVIDE UPDATES OVER TIME..

Total_Noob Releases TN-V eCFW

Total_Noob Releases TN-V eCFW
 
by
pinkfloydviste
Published on 12-21-2013 03:20 PM
8 Comments Comments
The Vita Scene really seems to be picking up speed lately. It was only a couple of days ago that Total_Noob released his much anticipated TN-V4 eCFW and then earlier today Total_Noob released TN-V5 eCFW. With this updated eCFW, Total Noob has brought us quite a few changes making TN-V easier than ever to use. For a more detailed list of updates, see the changelog below:




TN-V5 CHANGELOG

* Added ‘Plugins installer’ to recovery menu (Plugins -> Plugins installer ->).
* Added option to hide non-working items in XMB (these items will be hidden: Character Set, UMD Auto-Start, USB Auto Connect, Format Memory Stick, Power Save Settings, Network Settings and Remote Play).
* Added option to hide the volume bar in the home menu.
* Fixed bug that made some ISO’s showing as corrupt.
* Fixed plugin loading crash.
* Fixed autorun feature (also corrected its filename in recovery menu).
* Fixed the sleep-timer in music player. It’s cool, because the Vita’s music player doesn’t have this feature.
* Improved ‘Install Addon’ feature. Kxploit’ed homebrews, aka 1.50 homebrews can now be installed correctly.
ZIP’s which do not contain EBOOT.PBP don’t create corrupt icons anymore.
* Improved system stability. Hopefully there are no issues with FTP app and no blue screen of death anymore.
* Renamed ‘Hide CFW folders’ to ‘Allow anti-CFW games’. People who play DJMAX game should enable this.
It's great to see the Vita receiving this much-needed attention and here's to hoping it continues.

GUI v1.5 PUP Unpacker/Decryptor

PUAD GUI v1.5 PUP Unpacker/Decryptor from Nathan_r32_69

Submitted by Dan; May 10, 2013

PSX-Scene's Nathan_r32_69 has released an update to his widely popular and ever growing program PUAD GUI. This time he releases an update to v1.5. This PC app allows users to Unpack and Decrypt PUP's much like a zip or rar file and delve deep into it's directories to have a look at the PUP's file structure. This latest release includes RCO Support which has been added to the repacker option and two other new options which allows you to change the Core OS system version and also allow you to change the file's size. Be sure to check out the full changelog from the source, but also USE THIS AT YOUR WON RISK. Playing with apps like these could brick your PS3, this is not your usual PS3 Homebrew Play-toy, this is the real deal.

Instructions

Unpacker Option

• Choose a PUP file
• Select destination folder *
• Choose from the options available
• Click on Start/Iniciar

Repacker Option **

• Choose a PUP file
• Select destination folder *
• Choose from the options available
• Program will stop when finish, and now you can modify as you wish but DON'T RENAME ANY FILE
• Click on Repack/Reempaquetar for create new PUP

* - Make sure the folder is empty to avoid errors
** - Don't rename any file/folder, must have original name and extension given by PUAD GUI



Troubleshooting

Q: Program can't decrypt any file
A: Launch PUAD GUI, close it and open it again, key's variable will be set

Q: Can re-pack PUP file?
A: Yes, for dev_flash and Core_OS, repacker option is available from version 1.1

Q: Can i rename files created by Repacker option?
A: NO, NO and NO!! You can modify files but NEVER rename it

Q: The program is going slow or crashes
A: The program uses many resources, even if it looks locked is still working

Q: Background music is heard slow
A: Disable it in menu or in the boot.ini file

Q: How can i change the background music?
A: Replaces SOUND.BIN file in bin folder with another in MP3 format

Q: Always fails while unpacks PKG
A: Make sure PKG key is in the orrect place and the output folder there is no file

Q: Works with regular ps3tools files and keys?
A: No, only works with embedded files and keys, are modified for PUAD only

Q: If i change something in Core_OS and i'm doing something wrong, can brick my PS3?
A: Yes, your PS3 wil be bricked and only can be saved with a flasher, this option is only for developers or people with knowledge about it
A: I REPEAT, THIS OPTION IS ONLY FOR DEVELOPERS OR PEOPLE WITH FLASHER

Q: I get an error at startup
A: Make sure you have all the necessary files and update your version of Windows


Known bugs

• Sometimes music stutters when you have a lot of activity (when more RAM, better)
• Seems to hang but is working, don´t worry

Installer v1.5 - PUAD GUI v1.5 Installer x86 // PUAD GUI v1.5 Installer x64
Simple v1.5 - PUAD GUI v1.5 x86 // PUAD GUI v1.5 x64

PSP to PS3 Conversion@

Well well...Hello slow news day. Today we take a look at the past few days in the PSP to PS3 conversion community, with a few recent tools that have emerged. Ez PSP2PS3 1.3 and an update to aldostools PSP2PS3 2.1.2 mod. UnknownArchive did some extensive testing with doobz' PSPtoPS3 b22 tool with the Remaster Method selected as well. Over 150+ converted PSP titles were tested and shown in the source below. Check out the tools updates and changelogs below.

Ez PSP2PS3 1.3

Developed by djpopol member of our forums, Ez PSP2PS3 is a program designed to simply convert ISO PSP Minis PSP or PSP Remasters. Its major asset is its intelligence because its code was developed so that almost everything is automated. The detection of the ISO is for example made by the program, you do not even need to define if the game requires a signature.

Other features of the application are many, you will find a non-exhaustive list below. Supported formats are. DAX. CSO and. ISO, knowing that it is possible to convert .DAX / .CSO in games. ISO in manual mode. Three languages ​​are available: English, French and Spanish. Note that the program requires. NET Framework 4.5 to run.


Main functions:

• Conversion DAX CSO or ISO PSP Minis or PSP Remasters (optional)
• Choose between two modes: automatic mode and manual mode
• Compression EBOOT. PBP
• Generation and ISO.BIN MINIS.BIN files from the EBOOT. PBP
• Fix backup
• Customization of PKG to generate
• Conversion DAX / CSO to ISO (manual mode)
• Extracting ISO (manual mode)
• Creation and extraction of PKG (manual mode)
• Creation and extraction EBOOT. PBP (manual mode)
• Creating ISO. BIN (manual mode)
• Creating EDAT (manual mode)
• Choice of three languages: French, English and Spanish
• Customization of the UI

Version 1.3 released today is characterized by the contribution of many changes, the most notable are rewriting the code and support the conversion of games PSP Remasters.


Changelog:

• Code completely rewritten.
• Support the method "remaster" and can choose the MINIS2.TXT (for create, see minis2 examples.txt-file). Otherwise, the program uses the default options (see MINIS2.TXT)
• Support for PBP.
• New manual.
• Checking size of the ISO, which must not exceed 1775861760 bytes.
• Signing with ISO necessary. In automatic mode, the program will directly but not on the original ISO. In manual mode, you are asked whether you want to sign up or not, if yes, it is possible to choose the path of the new ISO (it is possible to resume the original ISO).
• For manual mode, creating images to the required size, with visual and save wherever you want (except for PIC0.PNG if it does not exceed the MAX (1000x560) dimension. If it exceeds the MAX size, then it will be resized the MAX size). Supported formats are: BMP, GIF, JPEG, PNG, TIFF.
• Ability to add and ICON1.PAM SND0.AT3.

Download Ez PSP2PS3 1.3

---

PSP2PS3 2.1.2 "mod"

PSP2PS3 2.1.2 "mod" updated 2013-05-09!
Based on the awesome scripts created by szczuru, and the tools created by Pink1, arnold (swapperneger), zecoxao, tpu, doobz, sandungas among others devs. This "mod" tries to streamline the process of conversion of PKG/ISO/CSO/PBP to PSP package for PS3. Latest versions include a GUI and improved compatibility.

Changes in v2.1.2 "mod by aldostools"
- Added option for resign tool to use: seboot or prxencrypter
- Added option to create PKG to update MINIS2.EDAT when a PKG was created and MINIS2.EDAT is updated.
- Added option to restore the MINIS2.TXT if it is not the default file.
- Fixed ICON0 for icons 80x80 (minis)
- Added ability to cancel the process
- Added progress bar for CSO and PKG

Previous changes

Changes in v2.06 "mod by aldostools"
- Removed the batch scripts.
- Added option to customize package icon & background.
- Added option to use custom title id/content id.
- Added support for multiple MINIS2 templates. MINIS2 can be edited before start the conversion.
- Added detection if the EBOOT must be resigned.
- Added warning about compression & tooltips.
- Added support for DONOR.PBP
- Added preview of media files when a PKG, PBP or ISO is selected

 

Changes in v1.8.1 "mod by aldostools"
- Added mapping of d-pad arrows to right analog stick in MINIS2.TXT for PSP Remasters. (thanks to lex3a for the tip).
- Includes a patched version of PSPtoPS3-b22 by Doobz (fixes type and a complain about version in SFO).



Changes in v1.8 "mod by aldostools"
- Added support for PSP Remasters. Thanks to doobz (See also: PSPtoPS3-b22)

EmpaBella Game Center

EmpaBella Game Center berada di Cianjur kota
Menyediakan berbagai macam peralatan dan aksesoris PS2 dan PS3
Juga menerima jasa pembuatan hardisk ekternal untuk PS2 dan PS3
Jual beli PS2 PS3 dengan harga bersaimg
Service PS2 PS3 bergaransi

Silahkan Hubungi langsung Kang Iwan Di Ramayana Cianjur keluraham Muka